CSIRO / APAS Specification AP-S4003 Waterproofing Membranes For Wet Areas
ITA is equipped to conduct the following AP-S4003 testing:
· AS/ISO 13007.5 clause A.7: Water impermeability
· AS/NZS 4858: Moisture vapour transmission rate / water absorption / cyclic movement / durability – water, bleach, detergent immersion / heat aging
· AS/ISO 13007.5 A.6.2: Initial adhesive strength
· AS/ISO 13007.5 A.6.3: Adhesive testing after water contact
· AS/ISO 13007.5 A.6.4: Alternative method of adhesive testing after water contact
· AS/ISO 13007.5 A.6.5: Tensile adhesion strength after heat aging
· AS/ISO 13007.5 A.6.6: Tensile adhesive strength after freeze-thaw cycles
· AS/ISO 13007.5 A.7: Waterproofing
· AS/ISO 13007.5 A.8.2: Crack bridging under standard conditions.
· AS/ISO 13007.5 A.6.7: Tensile adhesion strength after contact with chlorinated water
· AS/ISO 13007.5 A.8.3: Crack bridging ability at low temperatures
Enquire About the CSIRO / APAS Specification AP-S4003 Waterproofing Membranes For Wet Areas
Complete the form below and one of our team will be in touch.